中文版  |  ENGLISH

Modified NYLON

Model: Finished product map

The above pictures are for reference only, according to the real object accurately. To meet customer needs, we can specially made according to the properties of the product by R&D. Detailed parameters :( Click to view)

PA66 series Product main model Typical performance PPS Plastic| PPS plastic manufacturer |PPS Plastic raw material |PPS Engineering plastics |PPS Plastic raw material |PPS High temperature material |Polyphenylene sulfide PPS material | Special engineering plastics | High temperature resistant plastic | Hydrolysis resistance of plastics | Polymer materials | Plastic instead of copper

Model Specification Manual
Item Test method Unit Conditions Grade
ASTM G35 RPA66 GF10 GF20 G25 GF30 GF35 T30
Physical properties
Density D792 g/ 1.31 1.45 1.48 1.5 1.53 1.55 1.4
Moisture Absorption D570 % 23,24hr            
Molding shrinkage D955 % 0.7-1.4 0.5-1.0 0.4-0.8 0.4-0.8 0.3-0.6 0.3-0.6 0.8-1.2
Mechanical properties
Tensile strength D638 Mpa 60 90 110 114 120 125 60
Elongation at break D638 %              
Bending strength D790 Mpa 90 130 155 200 210 215 90
Bendingl modulus D790 Mpa            
Charpy impact strength ISO179              
Non gap
40 45 56 70 85 90 25
Gap
8 10 10 10 13 15 6
Thermal properties
Temperature of thermal deformation D648
1.82Mpa 85 190 235 250 250 250 130
Coefficient of linear expansion D696 1/              
Combustion UL-94 3.2mm厚 V-0 V-0 V-0 V-0 V-0 V-0 V-0
Electrical properties
Dielectric constant D150 106Hz 2.7 3.0 3.2 3.2 3.2 3.2 3.4
Dielectric loss angle tangent D150 106Hz 2.0* 1.6* 1.7* 1.7* 1.8* 1.8* 1.8*
Volume resistivity D257 Ω.m






Dielectric strength D149 MV/m 2mm厚 26 26 28 28 30 30 33
Technology characteristics Flame retardant high fluidity 10%Glass fiber reinforced flame retardant 20%Glass fiber reinforced flame retardant 25%Glass fiber reinforced flame retardant 30%Glass fiber reinforced flame retardant 35%Glass fiber reinforced flame retardant Mineral filled Good fluidity
Molding conditions Dry temperature Dry time(h) Item Barrel temperature Mold temperature Injection pressure(Mpa)
Back end Mid end Front end Nozzle
130 4 Non enhanced 220-265 260-265 260-270 260-265 60-90 60-100
Enhanced 230-240 265-270 265-270 265-270 60-90 90-120
Note: the above data is not the product of standard factory. For reference only.
?
Copyright?Guangdong Hones Technology Co., Ltd. All Rights Reserved.
Headquarter: No.14 Chenggong Road, Fengxiang Industrial Zone, Daliang Town, Shunde District, Foshan City, Guangdong Province, China    Tel: +86-757-22303518  Fax: +86-757-22222003
Branch: No.59 Yanyuan Industrial Zone, Xingtan Town, Shunde District, Foshan City, Guangdong Province, China
天堂中文在线_诱人的教师在线中文字幕_999zyz玖玖资源站免费中文